About Tanveer Deewan

Tanveer Deewan · 11-27-2009

If you have two ISPs and you want to use the first one for outbound internet access for hosts on your inside network and use the second ISP for people on the internet to access your servers.interface Ethernet0/0nameif outsidesecurity-level 0ip addres...

Tanveer Deewan · 06-09-2010

hi Alex,In the configuration I see that you have inspected the GRE traffic coming into the network. ZBF can not inspect non-IP traffic so you need to define the 'pass' action to that while keeping the 'inspect' action for pptp traffic. Once you do th...

Tanveer Deewan · 02-15-2010

That would only match ESP traffic.Tanveer Dewantdeewan@cisco.com

Tanveer Deewan · 02-13-2010

There is a server in your network 10.10.10.41 with the following static nat.static (inside,outside) xx.xx.133.242 10.10.10.41 netmask 255.255.255.255Try to use this server as your ftp client and see if it works. This may be an issue with NAT but we n...

Tanveer Deewan · 02-13-2010

The captures show out of order packet for the data connection. Do you have simultaneous captures on the outside and inside interface of the firewall?show ip inspect session detail ip inspect audit-trailCan you gather the output of the above show comm...

Tanveer Deewan · 02-12-2010

Are you trying to create a mesh type topology?Howmany sites do you have for the VPN?Tanveer Dewantoctate@gmail.com

Member Since	‎07-10-2008 01:10 PM
Date Last Visited	‎07-29-2020 12:06 AM
Posts	18
Total Helpful Votes Received	30

User Statistics

User Activity

Use one ISP for outbound internet and second ISP for inbound access to servers

Re: Unable to get PPTP to server

Re: ipsec access-list question

Re: I can't download ftp from inside my ASA 5510

Re: Active FTP works, not passive

Re: Multiple IPSec VPN routing