About Dayat_Azchew

Dayat_Azchew · 01-26-2017

Hi All, Please find the attached for network topology. I've a problem with ospf routing protocol. If i'm use bgp everything running as well, no issue. But when bgp was down at branch office, ospf is not working normally. Can't reach to Internet and S...

Dayat_Azchew · 01-24-2017

Hi All, When i create vlan using switch module L2 for point to point to ISP. it br can't reach to IP PE. Ping result RTO. interface FastEthernet0/1/2 switchport access vlan 126 no ip address!interface FastEthernet0/1/3 no ip address!interface Vlan1 n...

Dayat_Azchew · 01-26-2017

Hi Paul, If i'm trace from HQ to branch, trace result complete. and vice versa. But if I'm trace from branch to internet and server, only 1 hope to router. and ping result destination host unreachable. Thank you Regards

Dayat_Azchew · 01-26-2017

Dear Leonardo, I'm redistribute ospf into bgp and vice versa at HQ router. Here are the configuration. Redistribute bgp into ospf. router ospf 10 router-id 172.22.12.14 redistribute connected metric 10 subnets redistribute bgp 65432 metric 10 metric...

Dayat_Azchew · 01-25-2017

Hi Mark, It works! after adjust the MTU from their side

Dayat_Azchew · 01-24-2017

Hi Mark, Their arp is not detected in my router. #show arpProtocol Address Age (min) Hardware Addr Type InterfaceInternet 1.2.66.194 - ecc8.8226.7612 ARPA Vlan126Internet 57.30.24.161 12 4c00.821d.8ec1 ...

Member Since	‎01-24-2017 02:41 AM
Date Last Visited	‎11-30-2022 12:05 AM
Posts	6

User Statistics

User Activity

OSPF different process id and BGP

VLAN in layer 2 is not working - cisco 1841 ios 15.1

Hi Paul,

Dear Leonardo,

Hi Mark,

Hi Mark,