First, make sure you are running the latest firmware version.  From version 1.2.0 to the current 1.5.0 the VGA console port functions as follows: 1. VGA console port needs to be connected before the unit boots.     * User will see the system log on the screen     * If there is a time out (after 30 minutes), the screen will go blank.  You can hit the 'return' key to key back into the console. 2. If the system is already booted, the VGA console will not work. 3. If you remove the VGA cable after boot up and the timeout occurs, user cannot reconnect. Summary: Connect the VGA cable first, hit 'return' to enable the console if it times out. There is no way to turn off the timeout though.  Work around would be a script to keep issuing commands to the console so it nevers goes into timeout. ... View more

As mentioned previously on this thread you can continue to get software releases directly from QNAP.  A helpful site to visit is http://www.qnap.com/cisco  This will help guide you toward migrating your software to QNAP branded software which will be maintained by QNAP. QNAP has been the development partner for the Cisco Smart Storage products from day 1.  The same quality and feature-rich products are available in QNAP branded product.  While this migration may not meet the needs of everyone, it provides a path for a majority of folks to get bug fixes and feature improvements. ... View more

Eduardo, The RV series will automatically try to reconnect site-to-site VPN connections.  The RV042 also supports dual WAN connections for additional availability if one WAN link is not available. Thanks ... View more

An updated Cisco Hard Drive AVL has been posted. http://www.cisco.com/en/US/products/ps10817/prod_maintenance_guides_list.html http://www.cisco.com/en/US/products/ps10817/prod_technical_reference_list.html If you are planning on migrating to QNAP branded firmware or have already done so, please refer to the QNAP Hard Drive AVL. ... View more

Jonathan, Thanks for the post.  For the two features that are not available on QNAP (Mozy and Cisco Access Now), the best practice should be to deactivate it feature first....  Before transitioning to QNAP firmware. ... View more

Eric, Make sure you download the correct QNAP product firmware.  Bullet E on the http://www.qnap.com/cisco page list the models as per below.  If you download the wrong firmware from QNAP (ie. not the correct model, you will see that error). Cisco NSS322 is QNAP TS-259Pro+ Cisco NSS324 is QNAP  TS-459Pro+ Cisco NSS326 is QNAP TS-659Pro+ ... View more

Cisco firmware 1.5 has just been released and offers a migration path to QNAP branded software.  Once you unit has been transitioned to QNAP branded software, all the QPKG applications including Twonky would be available. Please read the news thread and be carefull about the disclaimers. https://supportforums.cisco.com/thread/2107220 ... View more

For all the users that would like to use QNAP QPKGs, you now have a path to do so. The new Cisco firmware 1.5 has just been released.  It will offer a migration path to QNAP branded software.  See the news thread below and be carefull about the disclaimers. https://supportforums.cisco.com/thread/2107220 ... View more

Firmware 1.5 has just been posted.  See the news thread below and read the disclaimers for migrating to QNAP branded firmware https://supportforums.cisco.com/thread/2107220 ... View more

All, The firmware with the fix to the AFP issue is available now.  Unfortunately the fix for Time Machine is not part of fw1.5.  You can however migrate to QNAP firmware 3.5 and get the Time Machine fix.  See the thread link below for more information and be careful about the disclaimers. https://supportforums.cisco.com/thread/2107220 ... View more

FYI:  See the latest news regarding Cisco fw1.5 and the ability to transition to QNAP branded software. https://supportforums.cisco.com/thread/2107220 ... View more