Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We currently use Cisco Duo with LDAPS for our SSL VPN Clients. On the firewall (ASA5508) we have Dynamic Access Policies in place, allowing certain Active Directory groups access to certain subnets.
When testing moving to SAML (Hybrid AzureAD with ...
Hi,
I have a pair of Active/Standby ASA 5508's running 9.16.2. I needed to reboot the Primary Active firewall so I performed a stateful failover which worked as expected.
I then rebooted the primary firewall and all traffic continued to work throug...
There's a known issue with MX's on v18.107 that in certain scenarios when you have a HA pair, if you make changes, it causes services to restart, including VPN's.There is an internal case at Meraki and my case is linked to it.The details i got told w...
I performed a stateful failover to secondary and reboot of primary standby without capturing to see if it was just a one off and lost service.
I then repeated this and captured the attached failover information.
Primary to secondary capture - just a ...
The ports are not default. The ports are live and being actively used to send the config to the standby. the failover link has to be working in order to perform a stateful failover, which it did. Entering no shut has no effect on interfaces already l...
