Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
How do I enable remote access to ASDM from outside of the network on the ASA 5505? This would be used for remote access to the firewall at a site that is not utilizing VPN.Thanks in advance !
First time attempting to set up a 5505. Trying to replace a snapgear firewall and replicate the settings to the 5505. The config is below...thanks in advance !hostname ciscoasaenable password 8Ry2YjIyt7RRXU24 encryptedpasswd 2KFQnbNIdI.2KYOU encryp...
Does anyone have a complete configuration for a Cisco 1760-v which successfully is using vitelity.net as a SIP trunk for incoming and outgoing calls?My setup is as follows:Router1760v with 12.4 ios and call manager express 4.1Switch2950 POEThanks in ...
OK, so i took the actiontek out of the equation and all is working.The only problem I have left that I found so far is that when I try to connect to someones remote VPN from inside our network, I am unable to establish a connection.The Cisco VPN clie...
I took the unit offsite, changed the outside address, and all worked.The site that doesnt work uses an Actiontec Modem from Fios, is there any configuration which would need to be done on that end? Or how would I troubleshoot this new scenario?Than...
