Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a Cisco UC560 with Call Manager Express/IOS 15.1(2)T2 and am trying to configure an ephone-hunt group using multiple ephone-dns with the same number, statically overlaid onto the secondary line of agents' phones. The relevant config is as foll...
I am having some issues with my ASA 5510 (running ASA 8.2) dropping ICMP unreachable-fragmentation-required-but-df-bit-set type messages coming in on the outside interface. I have the following entry in the ACL for the outside interface:access-list o...
Can you look at the running config on the UC540 for the telephony-service section and find the network-locale command under that? Is it present and what is it set to?
Sorry, one more thing. The default do-not-disturb button behaviour I'm getting with this setup seems undesirable. When the phone is on the hook and put into DND "mode" by pressing the DND button, behaviour is correct: hunt group calls are visible on...
Sorry if I'm being stupid - are you saying the forwarding needs to be applied on both, or that applying it on one will work for all the shared dns.I would have thought that applying it on only one would mean it didn't take effect if that dn was in u...
