Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
If that is the country code that you are supposed to be using, but your country is not specifically on the list you might have to select the closets one to your country that is in the same regulatory domain. Is the AP running in Mesh mode or do you h...
Just to add as well.. depending on your deployment or surrounding environment dropping your 5Ghz channel width from 80Mhz down to 40 or 20 Mhz could be something to address as well in high density areas to provide better channel re-use and decrease c...
As BHC already pointed out... that is really not a recommended way to deploy wireless on the 2.4 frequency. Typically most systems (especially enterprise level wireless systems) will not allow you to make that change. I know I have seen it in my neig...
You cannot use the CAP2602 (lightweight) version without a controller, but the can be converted to an autonomous access point like many of the other one. You do have to be able to download the autonomous code for that model though. If you can get...
The AP automatically does a broadcast look for the default file. The 255.255.255.255 is normal. He should just have to be sure to be on the same 10.0.0.x network with the tftp server. It does seem odd on the console session shows 192.168.x.x for the ...
