You can currently buy N9K device licenses for PI3.3, but unfortunately not all N9K devices are supported by PI3.3.
Does anyone know when the Nexus N9K-C93180YC-EX will be added to the supported list of devices?
If the Primary and Secondary WLC loose all connectivity between each other they will both become active controllers. Due to HSRP also being split at the same time they will both be able to reach the configured DG. When connectivity is restored betwe...
I have a similar issue. Whenever I start a Webex meeting all Bluetooth audio is muted. The difference is the muting does not appear anywhere in the system. I have Windows 10 with Bluetooth earbuds (4 different models tried). Before I even connect...
When the box for 'Management Via Wireless" is not checked it only blocks users connected via wireless that are anchored to the same controller. So, if you are an anchored wireless user to WLC1 you will be considered a wired user to WLC2 as far as ma...
James,Assuming the survey was done properly, you should be able to set the minimum TPC power level to be equal to the survey power used. The survey should also have knowledge about the devices you are using/planning on using on your network. This w...
The image you posted looks like the default Cisco Web Auth Successful page, which is internal. When external web page authentication is successful it should redirect the user to the configured redirect URL or the page the client tried to get to.Coul...
The WLC only does the proxy for the Web-auth, after the user has successfully authenticated there is no more proxy. Be careful when setting up web filtering for Web-auth if the web page the station is trying to hit can not be resolved by DNS then th...
