Hello Rahil,
There is a Reregistration Process that needs to be executed from the controller VM.
The process is explained over link: https://www.cisco.com/c/en/us/support/docs/hyperconverged-infrastructure/hyperflex-hx-data-platform/214504-ucs-hype...
Hello Rahil,
Thank you for your query.
Port requirement is briefly explained in HyperFlex hardening guide : https://www.cisco.com/c/dam/en/us/support/docs/hyperconverged-infrastructure/hyperflex-hx-data-platform/HX-Hardening_Guide.pdf
Please review...
Hello Mehul,
Thank you for your query, there is a KB article reporting similar condition https://kb.vmware.com/s/article/76239
To workaround this issue 1. Reboot the ESXi host to revert to the previous version. 2. Replace weak authentication proto...
Hello Mehul,
Thank you for your query.
Changing Hyperflex management IPs is a TAC supported workflow. Open a TAC case and our engineers will help you with the flow.
Changing Hyperflex data IPs requires re-installing the cluster from scratch (backup/w...
Hi Siddharth,
Thank you for your query.
Single link deployment would not work. HX installer will try to deploy the vNICs on both fabrics and association will fail in case of single active link.
Preinstallation Checklist for Cisco HX Data Platform als...