Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I am having an odd problem with SNMP, I have a Pair of Nexus 5548 UP's and the SNMP is setup very simply v2 with a RO communitee string, I had both devices setup on my SNMP NMS and after a few days one of the devices stopped responding to SNMP, I ...
I am in need of some guidance,I have a pair of Nexus 5548UP switches with layer 3 daughter cards. I have setup vPC, and have a layer 2 vPC operational to a 3750 switch.I now need to configure the 5548 Pair to route to layer 3 3750 switch, How do I se...
Before I had two 3750 Switches without stacking, I had HSRP setup per interface on the two switches.If the master switch fails the other member in the standby group would take over:switch#1 interface GigabitEthernet0/1 no switchport ip...
Hello All,Currently I Have all the hosts on my network from multiple VLANS getting IP addresses from the DHCP server, every host has a mac-->ip reservation.This is becoming a management headache, the users move constantly and the DHCP server won’t sh...
Hello all, I am using a Catalyst 3560G layer 3 switch as my distribution switch, I am working on some network redundancy and this is a single point of failure, what is the best way to go about fixing this other than having a cold spare of the same mo...
Hello Richard,I happen to have 3560's in my lab, I powered them on and tested the command:int VLAN 10ip address 10.10.10.1 255.255.255.0ip address 20.20.20.1 255.255.255.0 secondaryThis worked without any error, I beleive this could be a limitation w...
Also, I am running a Debug SNMP all command on both devices, the failing device has this:snmpd: pm_snmp_process_ethernet_counters_n_update_cache: error: statcl_parse_all_intf_mod_msg failedI wonder how to fix?
