Lets say I have 4 branch stores, including the main store which has the network ID I want to use. The main store has a net ID of 192.163.123.0. The branch stores are, 192.163.124.0, 192.163.125.0 and 192.163.126.0. Lets say I have a machine at the ad...

When I enable SNMP on my 1600 series router for the community of "API", I get the following error message. "00:27:20: %IP_SNMP-3-SOCKET: can't open UDP socket" Is this message normal, or is there a problem. Looking forward to your help.TIA,Mike

I accidentally blew up the IOS on my router. After some messing around, I was able to use TFTP to copy it back to the flash card. So now I have the IOS file back on the flash card, but I can't make it boot from it.I had to clear the config-register 0...

Are LMI types solely set by me or does the phone company have some role in there?My more consise question is... Is the LMI type I use in my routers determined by the telco?TIAMike

If I'm using 256k fractional T1, what is the proper timeslot settings?service-module t1 timeslots 1-4 speed 64, right?