Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I have a lan-tp-lan vpn between ios router and ASA5500 version 7.2.2. The tunnel ist established and the tunnel policy is specified in tunneling GRE traffic from the inside ip of the router (10.170.38.1) to another router (10.201.116.2) behind of...
Hi, i can?t add a WLC in my WCS. The WCS can ping the controller, SNMP is configured properly. I got the message "Failed to add device to WCS". The WLC is running Version 4.0.155.0, the WCS is running version 4.0.66.0. Are there any other credentials...
Is it possible to secure the configuration of wds ?I have configured two ap´s with wds. Priority is set to 200/199. So the AP with priority of 200 will be the wds master. What happens if a new ap will be installed configured with wds and priority of ...
Hi everyone, we have implemented wpa/leap in our WLAN. We would use certificates for machine authentication. There is a Cisco Secure ACS Server 3.3 installed. Is it possible to use the ACS self generated certificate without a CA ?The examples I found...
I have established many ezvpn connections with Pix501 and VPN 3005. The Pix is running Version 6.3.1 and I have tried to use the dhcprelay feature.client----pix501----ezvpn----vpn3005------DHCPserverPix(inside)172.16.1.1DHCP Server 10.1.1.100The pix ...
Hi Jason, I have the same problem as you described above. But I have to use a Cisco 1812 Router running IOS 12.4.Are you having a solution for this issue ? Thanks for reply.
Of course this is possible. But if anyone installs an ap with a priority of 255, the wds master will get some problems. This can be used for a DOS attack.
