Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We are trying to setup a a segregated DMZ wireless network.I've attached a simple topology to illustrate. So we have foreign controller and anchor controller. Firewall ports UDP16666,16667 and IP97 have been enabled and EoIP tunnel itself is up.Th...
Hi guys,We are planning to use 1552E APs with rugged SFP GLC-SX-MM-RGD. The switches are Cisco 3750X series.1. It seems Cisco 3750X series do not support the rugged SFP GLC-SX-MM-RGD. Can anyone confirm this or has used the rugged sfp with 3750X?2. I...
Hi guys,I have a computer with Windows 8 Enterprise and it is not connecting to our guest wireless network. Our guest wireless network uses WPA2 AES PSK for security.I've attached the debug client [client MAC address].Can you please advise what is th...
Guys,http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/product_data_sheet0900aecd80537b6a.html#wp9005314Cisco's Wireless LAN Compliance Status displays my country Mongolia as -E and says its compliant. So I'm assuming we need to purch...
The problem has been fixed.May be useful tonpeople who have same issue - the configuration and setup was perfectly fine and only the client couldn't access the network. The problem was with the Anchor WLC. Rebooting the anchor wlc fixed the problem.I...
The tunnel is up, I've enabled DHCP traffic between the DMZ subnet and the DHCP server on the firewalls that sit between them. The client is able to obtain IP address from the DHCP server and connect to the wireless network.Also the client is shown o...
