Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi allI’ve been trying a few days now to implement multicast routing on my home network in order to make airplay work between subnets. Specifically between an iphone and a hifi separated by different vlans. Failed, as I have no experience in multicas...
Hi allSince I configured ipv6 addressing(along with ipv4) on my home network, I decided to implement ipv6 on my existing ipv4 easyvpn server… with no luck so far . I don’t even know if this is possible since I’ve not found any related information on ...
Hi there!i cannot access local resources when i successfully connect via ssl webvpn to remote network. That is because i have the same local network address as the remote local network has. For example: Local ...
Hello ppl!ssl webvpn client on ios routers question:i'm trying to map users to diffent group policies. For example:user a with pasword aaa should fall on 192.168.1.0 subnetuser b with password bbb should fall on 192.168.2.0 subnetso far no luck i t...
Helloit seems when a client disconnects from easy vpn server the isakmp session won't terminate at all. As i wrote on a previous post i have problem when a clients disconnects aggressively from easy vpn server ios router: ip local pool won't refresh ...
Hello HerbertI tried this and yes, it solved partialy the problem assigning different IP addresses from local pool lists to different users using this way. However the main problem from my first post remains.. even though protected networks are speci...
Hi jeffFirst of all the problem i have is both on PC (webvpn client) and iphone (anyconnect client). Problem is mainly with protected subnets.Here's the partial configuration i created with help of CCP:aaa new-modelaaa authentication login default lo...
Hello Herbert Yes, i use only one client (iphone) for this profile to connect on my vpn. On a later post i wrote, i used this command "crypto ipsec security-association idle-time" and set it for 2 minutes. I thought that this solved the issue i had...
