About benjammin

benjammin · 11-12-2003

I'm having difficultly integrating HPOV and CW2K. Running Solaris 7 with the latest patch cluster. Cisoworks if 4th edition with version 5.3 of Ciscoview (CV). One of the routers on the network is a 3750 which is not supported in CV 5.3. I've downloa...

benjammin · 11-28-2012

This may be a silly question, but are the switches connected? Are they allowing the vlan to traverse the connection? Are you using VTP? What's the output of 'sh vtp status' of both switches?

benjammin · 11-28-2012

You can use the mac filtering for non-IP traffic and normal access-list for IP traffic.http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration_example09186a0080470c39.shtml

benjammin · 11-27-2012

did you change the config from the original post before doing the packet-tracer? I see the following in original config.access-list NoNat extended permit ip 192.168.0.0 255.255.255.0 P25Net1 255.255.255.0 access-list NoNat extended permit ip 192.168...

benjammin · 11-27-2012

Where are you seeing the drops?

benjammin · 11-27-2012

what is config on NTP server? Is authentication enabled? Can you send output of 'sh ntp assoc detail'?

Member Since	‎11-12-2003 11:22 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	10

User Statistics

User Activity

CW2K - HPOV Integration

stp problem

prevent vlan traffic per port or inside vlan

stuck on routing

How many broadcasts are too many broadcasts.

Clock unsyncronized with ntp