Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've setup an IPSec Remote Access VPN using the wizard in ASDM on ASA 5510. I created a new pool (10.10.225.0/24) and when client connects (either iPhone, Windows, OS X), authentication goes correctly and client is authenticated and assigned a prope...
I have a 3700 series router and a PIX 525 with unlimited licensing.PIX:int e0 DHCP to WAN, that works fineint e1 (admin shutdown for testing)int e2 up/up, 192.168.100.1/24, speed 100, duplex full, sec-level 100, nameif=INSIDE23745:int fa1/0, up/up, 1...
Thank you for the rapid response, here is the information requested. I had to modify the config some to sterilize it a little but all routable IPs ought to be clear, xx1, xx2, xx3, xx4, etc. I'm connecting to the outside" interface which is xx5.xx...
Sorry this is so late. Since the system is not going into production, yes, there is a workaround. Firstly, install the CUCM to an intel based system. I have a Sunfire AMD Opteron based server. I created the vm on a Mac Pro running VMware fusion, ...
Upon running arp debug, I can see arp is trying to happen, just not succesfully completing. Here is the output:c3745:006319: *Jun 28 15:08:44.074 EDT: IP ARP: rcvd req src 192.168.100.1 0005.5d18.4364, dst 192.168.100.2 FastEthernet1/0006320: *Jun 2...
Thatnks for the reply, I HAVE tried this exact config with different interfaces on the PIX (there are 9 total lol). Same results. I have not tried a debug arp yet, that is still new to me. Also, I am still new to captures, so I'm going to say that...
