Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is it possible to rescan a laptop from the ISE server? Using ISE version 2.3. Basically I need to test out that new switches or WLCs are setup correctly for posture. However, the ISE server is set to scan once every 24hr. I need to somehow clear the...
Configuring Router to VPN Client, Mode−Config,Wild−Card Pre−Shared Key with NATDocument ID: 14123http://www.cisco.com/image/gif/paws/14123/25.pdfI have been trying to setup the network shown in the diagram. I am using VPN client 5.0.07.0410.Router c3...
Hi Shamal,That didn't seem to help. Here is my current config on my router just to make sure that I am not over looking something. I might try using a C870 if I can't get this working.R1#show runBuilding configuration...Current configuration : 1836 ...
Hi Shamal,The same thing appears to be happening.R1#sh debuggingCryptographic Subsystem: Crypto ISAKMP debugging is onR1#*Mar 2 14:18:23.298: ISAKMP (0:0): received packet from 201.70.32.82 dport 500 sport 1093 Global (N) NEW SA*Mar 2 14:18:23.302...
