Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have deployed a new FTD Firewall in our environment but we are not able to ping out to the internet. We are able to browse the internet from the Inside to Outside but not able to do simple connectivity testing using Ping or Traceroute. Any assista...
I have two DNS Servers, one on the inside network 192.168.60.22 and the other on the outside 10.140156.12.
I have performed a one to one static NAT were
192.168.60.22 (Real IP)========= 10.132.154.22(NATTED IP)
10.140.156.12(Real IP)=========10.162....
Hello Everybody,
I have configured my anyconnect VPN tunnel. I am able to connect to the vpn perfectly but I am unable to ping and rdp into any of my resources.
webvpn enable ISP-0 anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1 anyconnect...
There is a NAT and an acl to permit all traffic from Inside to Outside.Users are able to browse the internet but we are not able to ping 8.8.8.8 as part of connectivity testing.
It was just a matter of creating an access-list to permit all internal host to the Anyconnect IP address and applying the access-list to the inside interface.
webvpnenable ISP-0anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1anyconnect enabletunnel-group-list enable
ip local pool MY-IP-VPN 10.6.6.1-10.6.6.10 mask 255.255.255.0
access-list ANYCONNECT-SPLIT standard permit 172.16.100.0 255.255.255.0a...