Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
All,I'm pretty green when in it comes to ASA, Routing, and Nexus, mostly form being confined to a layer 2 switching environment and could use some help on a configuration...The currently topology I'm working with is attached and seems to be working n...
I'm reading the Closed Mode deployment strategy for Cisco ISE and was wondering if anyone had any experience with Cisco ISE and dynamic vlan assignment? My situation is 2 user vlan IDs that are /23's lets say vlan 10 and 20... Instead of creating 2 ...
Sorry for delayed response, but this totally worked! Appreciate your help! One gotcha I found tho... If you have "switchport acces vlan 30" command on the interface, and that SVI has DHCP helper address, it will cause problems as the switch tries to ...
I ran into same exact problem... Everything on the interface needs to match exactly to the other interfaces. I was missing the below from the edge switch side.
interface TenGigabitThernet1/0/1
description vpc 1015
switchport trunk native vlan xx
...
