Hi all, I have got a WS-C2960X-48TD-L and I have a question regarding QoS.==============================First, QoS is disable as you can see:==============================#show mls qosQoS is disabledQoS ip packet dscp rewrite is enabled =============...
Hello, my question may sound stupid, but please explain to me the following behavior.CISCO ASA 5505Interfaces: OUTSIDE - 194.50.90.221 255.255.255.0 / security level 0DMZ - 192.168.12.254 255.255.255.0 / security level 25INSIDE - 192.168.0.6 ...
Hello, I am setting up an EtherChannel between CISCO 2960 and a 6500, both run IOS. Number of intended switchports in a bundle is 2. Is there any way I can do this without affecting the live network. There already is an uplink between the two, but is...
OK great Joseph, again thx for the reply, one last thing I am struggling to understand, below are the defaults for WTD 1 and WTD 2 etc... ==========================================h2-15-1e.ord1#show mls qos queue-setQueueset: 1Queue : 1 2 3 4--------...
Hello Joseph, thank you for your time and your response. I understand what you explained and that queuing does need to happen in normal operations when there's no over subscription, and there are egress buffers (queues) to deal with that, in 2960-X i...
Thanks guys, makes sense now This was just one of the thinks I wanted to have clarified yes it is a firewall and not a router By the way, I am still a bit confused, because I tried to run the "show run nat-control" and it shows "no nat-control"...Yes...
Hello guys,thank you all for your help and the information provided. I will ask my manager whether I can proceed with setting it up the way you suggested and post all outcomes...Cheers for now, you better be right... Yes I will make sure that speed ...
