Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm new to CatOS and can't seem to find the right command to remove a logging server entry. I know the command to add a server is: set logging server <ip_address>.
I have a cluster of Catalyst 2924-XL/2950-24s connected to a Catalyst 5505. I've created the vmps database and loaded it to a tftp server and enabled vmps on the 5505. I've also configured the vmps server on the Command switch and have verified it ...
I'm using a Catalyst 2900XL and 2950 for training and would like to find a way to reset the switches to their factory defaults, wiping away all configs, vtp, and vlan info.Thanks,--tom
OK. The 'clear configure access-list ' works. Thanks for your help.This must be a hidden command since it doesn't show up in the help list for 'clear ?'.
There is no "clear configure" command. Here's what I get when I enter 'clear ?' from the 'ASA (config)#' prompt: capture Clear packets in a particular capture conn Clear current connection information console-output C...
Problem solved - my command switch (2924C-XL) running IOS 12.0(5.1) has no problem with dynamic vlan configuration. The member switch (2950-24) running IOS 12.0(5.3) does not support dynamic vlan. I have to upgrade to IOS 12.1 to get that functiona...
