Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am having a heck of a time getting this Cisco USB Console to work,I down loaded and installed the driver, its a windows 7 x64 systemI plug in the router and it install and if I look in device manager I get comport 3 under ports and at the top I see...
I am working on a config to help with VOIP issues and some expansion for my company.we have a COX Optical 25 meg fiber line coming in to their equpment.its patched via Cat6 which is plugged in to a 8 port netgear gigabit switchwith 2 connections goin...
I am having a problem getting this to work and I have always done it with 2 Static ip address. but now this company changed to 1 and I am doing something wrong.I have comcast with 1 static IP, I have a local LAN with 6 host and 1 server that does Ma...
I never saw the com port with a ! it was all set, unfortunatly I do not have the 2911 here any more so I guess It will have to wait for the next time I try USB but thank you for the help guys.I did try a USB 2.0 and 3.0 ports and everything on my co...
This is just the device we bought not sure if its hte best device, but along with moving the VOIP connection outside of the sonic wall this router will be used later for a MPLS connection in a few months.the switches in use are SG500-28Pif a better ...
ok here is my proposed new config to remove the old stuff and put in the new stuff. tell me if this is right and I am leaving the NAT global alone I didnt think that needed to changethis is my nat statement which I was not changingglobal (outside) 1...
