Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good Evening,
I had some issues with eigrp not working and internet being down once in a while. It comes up once the port connected to the eigrp neighbor is shut down and no shutted. I think it is something related to spanning tree loop being created...
Hello Experts...
I tried everything I knew to fix an issue with vlan but I cannot. I suspect that there is a missing word switchport that should be in the configuration. I am referring to the word "switchport" by itself under the interface. Should I...
Hello Experts,
I have a ASA 5505 in my lab and I have Verizon router.
I have a second network behind the ASA and routing is done on the ASA. All traffic from the "inside" interface goes out through "Outside" interface without any issues. However, no ...
Hello Experts,
I am in a very confused situation where I cannot ping to VLANs on the same layer 3 (6509) switch.
Details:
There are 4 vlans on the switch: Ex:
vlan100 (10.129.32.1/22)
vlan 220 (10.222.1.1/24)
vlan 200 (10.140.1.1/24)
and vlan 300 (...
Hello Experts,We had a friendly discussion at work about Public IP addressing. My friends says that ISP's like Verizon, Comcast etc assign same Public IP address to multiple customers and they all will work (same public IP to few thousand customers)....
Hi,
I assume what you want to say is that you want to connect to your office VPN. Is that correct?
If yes, you will have to know what kind of VPN do you have. IPSec or SSL? You will also need the pre-shared key and the public side IP address of the ...
Hi Ravikant,
Your internal IP range looks fine. The external IP pool range and your pulic IP address is something I need clarification on.
Question 1) Is your public IP and the pool of IP's you have got from ISP in the same range or different?Questio...
Hi Praveen,
Depending on your requirements and the budget, contact the local Cisco sales for the pricing on the licenses.
http://www.cisco.com/c/en_in/about/contacts.html
Once you have the activation key, it is a peice of cake. I see your attachement...
Hi Guillermo,
Thanks for the answer.
My core 6509 has one blade with fiber ports and all other are GB ports. The fiber ports are connected to the other switches and the GB ports are connected to the offices. However, sometimes people connect extra 4 ...
It's the firewall or also called Windows defender in windows 8. Disable that to test and if that works, enable the firewall and create a exception.
HTH
Saji
