good day people,how can I prevent other switches from connecting to my switch physical. I need something like portsecurity, detecting other switches or HUBs, then block the port in that situation......
good day,Could anyone out-there please assit me with basic connectivity/configuration of the 2 devices for the 2 devcies communicate e.g be able to ping each other managemnet interfaces.Nexus Configuration:vrf context management ip route 0.0.0.0/0 1...
good day,Could anyone out-there please assit me with basic connectivity/configuration of the 2 devices for the 2 devcies communicate e.g be able to ping each other managemnet interfaces.Nexus Configuration:vrf context management ip route 0.0.0.0/0 1...
Thank you very much for your response. So does this mean, at layer 2 for now e.g with cisco 2950’s I won’t be able to configure my management vlan addresses with IPv6......?
Thank you very much, I now understand how this thing works....So if I was to get away with the 3560, I must have two connections into the 6500, one through the 6500 uplink to the Ethernet interface in the nexus and then one connection through one of ...
Nexus# sh ip int mgmt0IP Interface Status for VRF "management"(2)mgmt0, Interface status: protocol-up/link-up/admin-up, iod: 2, IP address: 10.13.37.201, IP subnet: 10.13.37.128/25 IP broadcast address: 255.255.255.255 IP multicast groups locally ...