Please Help. Not able to get the answer.
Using GNS3 with ASA 8.4 & ASDM 7.1.
Can ping from inside to outside but cannot ping from DMZ to Outside.
Cannot ping from outside to inside or DMZ.
Router on Outside interface is just to see whether ping p...
Steps away from exam & got struck in routing of asa & router. checked the document. still getting issue.
If enable RIP, I'm able to communicate & nat from out side to inside. But not able to do the same with static routes.
Network object groups...
When ping from PC 1 to R1 ( inside to outside ), Ping was successful with following debug output on ASA.
ciscoasa# ICMP echo request from inside:10.1.0.2 to outside:1.2.3.4 ID=27351 seq=1 len=56ICMP echo request translating inside:10.1.0.2 to outsid...
Thank you.
But CCNA security exam require to configure these using ASDM only.
Can you tell me how to configure using ASDM.
NAT statements are in place. Referred some documents & CBT nuggets. But not able to ping.
Vishwa
Mainly concentrating on outside to inside communication. So keeping aside dmz, checked. but now working.
Considering RIP enabled, If inside router is having 192.168.x.x series, & pinging from outside, I can ping till router fa 0/0. not able to reach ...