Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
What is the risk associated with increasing the idle timeout value for IPsec site to site VPN or disabling the idle timeout for IPsec site to site VPN.
We have ASA PAT Pool exhaustion issue and show nat show the PAT pool allocated 64498.UDP PAT pool any, address x.x.x.x, range 1024-65535, allocated 64498 Could you please let me know how we can find which IP has mostly used the PAT translation for UD...
Nexus 9K switch module 40G Ethernet Expansion Module (PID: N9K-M12PQ) I know it supports 40G SFP. My question is that will it support 10Gbase-SR (SFP-10G-SR) as remote end devices only support 10G.
I have connected the VMware on one of the leaf switches let say switch 6. I can see the endpoint mac address on leaf 6 from one of the physical ports but I don't see the mac address of that endpoint on leaf1 which is a border leaf connecting L2 exter...
We have WAN interface having BW 100Mbps and wanted to configure QoS so that any server source 10.1.1.0/24 to destination 10.2.1.0/24 should have dedicated BW 20Mbps and rest should get allocated to all other traffic Will this archive with below confi...
We had a similar issue on 9K. I don't remember the version but it got fixed after reload the 9K.Note: as the running config is not getting saved in startup/nvrm so please take configuration back (show running) before reboot and post reload compare th...
Please check the Wireless LAN Compliance Lookuphttps://www.cisco.com/c/dam/assets/prod/wireless/wireless-compliance-tool/index.html in the model AIR-AP2802I-D-K9; -D is the regulatory domain of your AP. The -D Regulatory domain is for India and for ...