Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have 2 Core switches in Active and Passive mode,apart from that I have edge switches and wan routers....in all the cisco devices I want to configure the SNMP community string....please guide me ...Thanks and Regards,Lavanholy
i have configured pix 515e for vpn client. i then installed cisco vpn client in my pc. now if i connect my pc to pix using the cisco vpn client ,i get connected and pc is assisgned a ip address from the pool i have configured in pix.my issue is : whe...
Hi,I have connected Cisco CM 4.1(3) to another IP-PBX(Different Vendor) through SIP trunk.Now how do I send G711A,G729 and G723 codecs through the trunk to the IP-PBX which supports all the codecs.Also, If the IP-PBX sends G723 or G729 algo's in INVI...
Hi , Anybody help to change the sip parameters when initiated calls like codec,port,ip address,dialtone.And alsoparac with sdp setting also.Which menu can change in ccm 4.1(3)?anybody please reply.RegardsD.Anbudurai
Hi,the link you provided was very useful.But still i am not able to connect.In the vpnclient log i see the following message:AddRoute failed to add a route: code 87Your help will be appreciated.RegardsArul
