Hi I'm looking for Low level design (LLD) for unity connection and Presence, I hope cisco has kept some sample documents on cisco website for LLD,NIP NRFU,etc etc, Can anybody rotue me to the link for the same.Thanks.
I have 4 No's branch router's with ADSL link connecting to Internet and also to HO (Cisco 3825) acting as Easy VPN Server. Now i am planing for the backup of the ADSL i.e the async port on the branch router, whenever the ADSL link fails the async sho...
Hello,I have a FWSM in Active/standby mode. My primary failed and i got a replacement. At present my standby FWSM is active and Network is running fine, I want to insert the new FWSM in the chasis, once it is inserted both will be active because ther...
Hello,I have only 1 public IP on my router outside interface which is connected to ISP, I wanna just confirm the below from u experts,I want to create a site -to site VPN with other branches i have a proper IOS ------- I hope i can do itThe public I...
Hello Dears,I want to bypass vpn traffic from natting as my ASA OS is 8.4 can anybody rotue me to the alternate command in 8.4 that will work as Nat 0Thanks
Hello Julio,As per your previous mail , you can have different versions on the software ( 3.2 (5) to 3.2 (19) ) while you do the upgrade, As per cisco statements while only during upgrade but firewall is not aware whether we are doing upgrade or it i...
Dear Julio,I can't understand the below lines in cisco config guide:but you can use different versions of the software within an upgrade process.So i will reach to final answer that if FWSM have difference in minor version they can't work in failove...
Hello Julio,what you have wrote above this is what i have read in configuration guide but still these words are not clear for me,I hope what the guide trying to explain is: If i have a primary and secondary FWSM with 3.2(5) and If suppose i upgrade ...
Hello Julio, faillover can work with difference in minor version for Example 3.2(22) in primary and 3.2(5) in secondary and also minor difference in asdm images.Thanks
Dear Julio,So all together the commands for the failover are:failover configuration on New FWSM which will be primary unitfailover lan unit primaryfailover lan interface faillink Vlan11failover link statelink Vlan16failover interface ip faillink 172...
