Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We doing some testing on FabricPath (FP), VPC and some other NX-OS features on Nexus Platform.The ASA Firewall is connecting to 2 x N7K with VPC (2 x 10GbE). Logically, we setup like thisN7K --- VLAN10 --- FW ---- VLAN12 ---- PCN7K is doing static...
Hi,I tried to authenticate user from juniper EX switch to Cisco ACS Radius. The ACS can authenticate normal user via 802.1x but not MAB.I set in the acs to authenticate any request using RADIUS IETF.I also tried to connect to different ACS server usi...
Hi..1. I'm deploying 802.1x on Wired environment and we are using ACS 4.2 with remote agent.2. For redundancy purpose, i install 2 ACS SE and 2 Remote Agent.3. The 1st Agent works perfectly with the AD. It can translate both machine and user authenti...
Hi,I would like to ask 1 question about machine based authentication on 802.1x.1.We are deploying 802.1x on wired user.2.Some user are using machine based authentication in order to authenticate their port.3.However, after the user password expired, ...
Hi,I would like to ask some question from the expert here.1. I'm building 802.1x infra for my customer.2. We are using ACS SE version 4.23. We have successfully integrate the ACS with AD using Remote Agent.4. Using will authenticate using PEAP MS-CHA...
Base on the release noteshttp://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/release/notes/52_nx-os_release_note.html#wp423588You need to upgrade to 5.1.(3), and from there, the upgrade to 5.2.7 is supported using ISSU i assume. Worst ca...
Yes, it's machine authentication.It never been away from the domain. It just the user need to change her password due to expiry. Before her password expired, no problem occurs. It seems to me that the machine is trying to authenticate with the old pa...
I'm using version 4.2.How to make sure that it's user-auth session?It's because, once the user login to the PC, she is assigned to the proper Vlan. But before login, the PC is assigned to Guest VLAN. This is due, the machine will try to authenticate ...
