Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
When you configure ISE with an SMTP server, which node are the alarm emails sent from? The MnT, PAN or PSN?
How about for Guest related emails, would it be the same node as the alarms?
Instead of using SNMP TRAPS I would like to use INFORM requests. When I receive TRAPS everything is working correcty. When I receive INFORM requests, the source interface is reported wrong.My config:snmp-server trap-source Loopback0snmp-server source...
The IP-SGT mapping propagated from ISE to the N7K vrf should bind, as long as the N7K isn't learning a conflicging mapping from a higher priority source. As long as the device has the correct IP-SGT mapping, the egress policies associated with those ...
Your requirements have changed since the original post. If you're doing 802.1x, why do you even need a portal page to identify the user? Since you're already doing 802.1x, you can identify the user and just grant them the access they need for that se...
Something is going to need to inspect that traffic to provide the filtering you're looking for. There's nothing in TrustSec that will inspect that traffic for you. You're going to have to inspect the traffic on the endpoint via some agent software, s...
Instead of forcing your load balancer to load balance between PSN's at separate DC's, I would configure the load balancer to only load balance it's local PSN's. I would configure both load balancers with the same virtual-server IP address. Configure ...
