i am trying to configure a content with service port re-map but i have problem when i enter a URL on the content o tcp port 80 .This configuration work fine :service SRVAIX111 keepalive type tcp ip address 10.7.100.134 protocol tcp port 9084 act...
anyone know if it's correct on WLC configure one WLAN with WPA2 and Radius MAC Filter (ACS) ?without Radius MAC FIlter the WLAN work fine ,but if i try to configure Radius MAC Filter the WLAN stop to work .many thanks
When i try to see the updates status on IME dashborad i don't see if automatic updates work fine .Only CLI (show conf) show the correct status .Can someone tell me if it's correct o there is another way to see this update status on IME ?
when i try to establish a VPN lan-to-lan between asa and cisco router ios through a nat device .Vpn work fine if router start vpn but fail if asa start.Router logs give these errors :*Aug 27 07:11:09.945: ISAKMP:(0:961:SW:1): processing KE > payload....
When i try to configure CSS with trasparent proxy back-end SSL serversi am not able to set URL in the content like:***** SSL PROXY LIST**************ssl-proxy-list testssl-server 1ssl-server 1 vip 1.1.1.1ssl-server 1 port 443ssl-server 1 rsacert rsac...
i have 2 1200 Ap with WDS and 3 VLAN (100,101,102)with mac authentication only.When client roam WDS re-authenticate users to ACS .I do not have VLAN 1 up ,but native vlan is 120How i can configure the APs with FRS .have you an example ??
i fix the problem with :script dialer callback and script with ATX3 :chat-script callback ABORT ERROR ABORT BUSY "" "AT" OK "ATX3" OK "ATDT \T" TIMEOUT 30 CONN
