Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear Team, I purchaised brand new router from Cisco 2921 also i purchaised an SFP-Transceiver (GLC-SX MM) along with this Router. Currently the Router is having Universal IOS: “c2900-universalk9-mz.SPA.151-3.T1.bin”. Kindly provide the IOS i woud lik...
Dear All, I'm looking for to make a looping function and check the Peer with IPSLA. Kindly provide a solution, your support will be appretiated, thanks. Summary/Requirement: Cisco EEM Query need to run when the track is up/down. During up/down, its w...
Gentlemen,I have read your post and Mr.Richard Provide one solution. I would like to mark one more scenario to acheive this in simple manner. 1.Connect Both HUB-Routers to Switch. and run HSRP(for redundancy) or MHSRP(Redundancy with Loadsharing).2.M...
Make 2 applet. FIrst applet is during the link is coming down. so it will shut the port. so the traffic will go through the secondary link. Second applet is during the link back to normal. You can perfrom this after some more time (this time you can ...
Dear Tim,This is achevable by providing two default static routes to internet. the first ISP should be tracked by the IPSLA. So it will be only in the routing table and will process. During the first track is coming down, it will flush from the routi...
Dear Jacques, Your information is right and it will work. But i have one query. Most of the IOS "event track 151 state down" command will not work. Whats the solution for this without changing the IOS. Also is any commands to hold on for 30min when t...
