Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Topology of AS 10:R1------------------------R4 (RR)| |R2 (RR)-----------------R5 R1 advertises BGP route 168.1.0.0 to R2 and R4. R5 learns IBGP route 168.1.0.0 from RR R2 and RR R4 in 2 different clusters. R5 chooses...
Topology of AS 10:R1------------------------R4 (RR)| |R2 (RR)-----------------R5 R1 advertises BGP route 168.1.0.0 to R2 and R4. R5 learns IBGP route 168.1.0.0 from RR R2 and RR R4. The route reflected by R2 is the b...
I have 4 routers in area 0. Here’s the Link State database of each router.#show ip ospf data Router Link States (Area 0)Link ID ADV Router Age Seq# Checksum Link count1.1.1.1 1.1.1.1 1574 0x80000005...
I am monitoring 2 or more source interfaces which are running 1G traffic on each interface. Destination is 10G interface.There are 2 kinds of traffic running through the source interfaces: icmp and regular IP traffic. I am only interested in capturin...
Experiment 1: without RR:R2---------------------------------R1----100.1.2.0 |---------------------------------R4----100.1.2.0My observations:•1. BGP route 100.1.2.0 learned from R1 is best path in R2’s Routing table because of R1’s lower adver...
Hi Guiseppe,It is surprising to hear that both RRs in different cluster is a better design than both RRs in same cluster (Redundant RR).Would you please draw diagrams of both designs for more clarifications?thx,Jingyi
