Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Abhilaash,Can you verify first the SFP type is correct for the module.http://www.cisco.com/en/US/partner/prod/collateral/ps4159/ps6409/ps4358/product_data_sheet09186a00801bc698.htmlon table 1 check the correct SFP for DS-X9704 module. make sure bo...
Depending upon the switch type , First check the interoperability matrix for which interop mode is suitable between MDS and Brocade switch.http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/interoperability/matrix/Matrix5.htmlThen configure ...
Regarding credit Buffers Extended BB_credits : allow for a very long haul Fibre connections between two MDS switches.MDS9134(config-if)# switchport fcrxbbcredit ? <1-750> Enter receive BB_credit default Default receive BB_...
The Question isn't clear about what are you trying to acheive.B2B is internal mechanisim and depends upon what the Module / Port / HBA is capable of how many buffers.If you are intrested on MDS side which Module, Port has how many default Buffers.Her...
