Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,It seems that there are two methods in Cisco ASA to do the interVLAN routing as below:1- Interface Gi 0/0 switport mode truckswitchport allowed vlan 1,2 int vlan 1ip address 1.1.1.1 255.255.255.0no shut Int vlan 2ip address 2.2.2.2 255.255....
Hi,We have many hosts that share the same first and last octet. Is it possible if we can aggregate all those host like below ACL in the destination?access-list test permit ip host 1.1.1.1 10.0.0.126 255.0.0.255 Thanks,Peyman
Hi AllI need to upgrade the flash memory of the ASA 5520 from 256Mb to 512Mb. As far as I reallized the built-in flash memory called system compact flash and there is also an empty slot which it is possible to install a user flash. What is the differ...