Forgot to add that you will want to encaps IPX in IP so that you will have an IP only network. This way only IP is running across the switches until the packet hits the other router and is unencaps.Stevan
Without seeing some of your configs and your network diagram, I am going to assume several things.1) You are using IPX and IP on your network.2) The server is using totally IPX with no IP.3) You have configured VLAN's.A) Put the servers that are runn...
As in your case, you have already answered your question. You build the list the way that you want to and then the implicit "deny all" takes care of the rest.If you send me an example of what you want to do along with a network diagram, I would be h...
Try using VLAN ACL's on for size. Let me know if this works or if there is something else that you are looking for.http://www.cisco.com/warp/public/473/90.shtml#trust
