Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
This is he switch I just configured. !interface GigabitEthernet1/0/46 switchport mode access switchport voice vlan 20 srr-queue bandwidth share 1 30 35 5 priority-queue out mls qos trust device cisco-phone mls qos trust cos auto qos voip cisco-phone ...
I would need to change the IP and name but I want the vlans, qos ...... to all be the same. Is that posible? They are all 2960s.I'm configuring a new switch and getting a "%PM-4-ERR_DISABLE: bpduguard error detected on Gi1/0/45, putting Gi1/0/45 in ...
I have the file on my desktop not a ftp server or http web server. I can't log via asdm but I can login with "session 1". I tried "copy license-key C:\Users\user1.TOM.001\Desktop\JAF1544AEDS_20130339082809607.lic" It did not work?
Sonora meredith Mar 19, 2014 at 10:35 AMI unplugged the Ethernet cable from the ssm module and fired it back up. ASA 5500 Series Security Services Module-10Model: ASA-SSM-10Hardware version: 1.0Serial Number: JAF1544AEDSFirmware...
I managed to shutdown the ips which is good because the ip address conflict is with a vm host. Now if I could change the ip address without tuning it back on that would be great. Or somehow copy the config edit it maybe in note pad and reload it.
