Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi I know that the UC320 is end of life, but I was hoping that someone can answer this question:
I have a customer complaining that people can not hear him, when making calls via the sip trunk. I tested and noticed that the volume is significantly lo...
Hi,I just installed scc server and 20 call connector advanced clients at a customer site. Everything worked on the installation.Installed all the licenses ok.I just received the following email from the client:"A number of staff including myself are ...
Hi,I have a UC540 with 7965 phones installed at a client site. The connection is 3 ISDN/BRI channels with Telstra in Melbourne-Australia.The phone system was setup as key system, but we had to reset it, because we had a dis sync between the cli and c...
Hi,I have installed a UC540, at a clients premisses, and the client requested, that the reception should be able to have some kind of notification, when some of the collegues have the DND button switched on, on hteir phone, to get a light or somehow ...
Hi,I would like some help in this scenario.I have a uc560 installed for a client.All incoming calls on the main line come to extension 777, which is a floating extension.There is a call forward all on this extension that goes to a call blast group 51...
Hi Andrew,This is how I would do it:if you have three phones in sales:phone 1 -> ext 101phone 2 -> ext 102phone 3 -> ext 103add another extensions on each of these phones on another buttonphone 1 -> ext 401 label salesphone 2 -> ext 402 label salesph...
Make sure you have the following static routes on your default getaway (your modem router that connects to the internet).I will take the example for your network as uc500 ip address 192.168.10.1CUE address 10.1.10.1phones network address 10.1.1.0 255...
