Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I'm trying to figure out how to deploy a Cisco ASA 5512-X IPS inline in bridge mode on an ethernet trunked interface.switch1--------------vlan10,20----------------ASA IPS--------------vlan10,20----------------switch2I basically want to drop the IP...
We have a 3030 Series concentrator with a site-to-site VPN to a pix firewall and another site-to-site vpn to a Checkpoint firewall. Is it possible to get one site to talk to the other another via the conentrator ? If so how do i go about getting th...
I managed to erase the flash. I have copied the new bin file back. I followed the instruction on the web on how to recover the IOS. When i reboot the switch it cant find the file flash and says the boot sequence vairable is not set!Can someone tell m...
We are using a 2511 (IOS 11.1) attached to a bank of modems to provide dialout support on our network by using reverse telnet to rotary port 7001. Occasionally individual router ports seem to lock DTR low with the result we can no longer dial from t...
We have a primary and secondary site which I need to span with the same VLAN structure (i.e. four VLAN's). The only type of WAN link available between the two sites does not support any form of traffic separation (i.e. not ATM or Frame). Can the VLA...
You're missing one thing. You need to add a static host route for the ip you're tracking to alway point it out your internet primary pathSent from Cisco Technical Support iPad App
The WAN link we have is actually a carrier provided LAN however they do not allow customers to implement their own VLAN structure because they use it internally to maintain customer separation. Also the sites are too far apart for 'private' fiber.
