Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HI Champs,
I am struggling to isolate a problem but not exactly sure if this is related to hardware or Memory issue.. So here is the problem..
Problem - I have Cisco 881 router and have 4M MPLS pipe from provider. I am running QoS across the network...
Dear all,I am facing a Tacacs issue with 15.3 image on 1941 router..Basically when we ordered new 1941, the default image we got was c1900-universalk9-mz.SPA.153-1.T1.binNow we have two privilege levels configured for different users group on Tacacs...
Hi,Can experts here guide on two queries below..01: I know only speed mismatch causes the connection lose.. but if two ends are configured at auto/auto and I just set duplex at one end as "full" (speed remains auto/auto).. will this cause connection ...
Hi Guys,I have recived below notification message while configuring BGP for two different VPNs on 3945 %BGP-3-NOTIFICATION: received from neighbor 62.134.22.157 active 2/8 (no supported AFI/SAFI) 3 bytes 000101 (timer expired)I am able to configure B...
Hi Friends..I am facing problem with redistribution of iBGP learned routes into EIGRP.. Please see the diagram attached..here is the scenario..eBGP = Between R1 and R2, Between R1 and R3iBGP = Between R2 and R3EIGRP= Between R4 and R2, Between R4 an...
Hey Georg,
Here is the Juniper config.. It is an ATM circuit with RJ45 handoff at customer end but on PE end it is configured as "Ethernet over ATM LLC"
set interfaces at-0/0/0 atm-options scheduler-maps MPIPN8256047-atmaccess vc-cos-mode strictset i...
HI Georg,
I know the nested policies are extra bits and best to remove them but the standard is not defined by me.. so I have to follow which is been used at a large.. Below are the outputs as you have requested.. I was thinking of it as 'Wedged inte...
Hi Joseph,
Please check config I have uploaded CE config which should give idea of QoS applied to Business and Internet traffic.
Core is Juniper and the PE(at branch site) has four queues for different traffic flows from PE to CE.
EF queue has given ...
Sorry.. I forgot to upload the documents.. please find it here. Text file has configuration and other stats. Two .png files shows the latency for BA and RT data queues.. We are monitoring each class traffic from a central monitoring station and these...
