About Aris Pipis

Aris Pipis · 06-28-2011

Hi all,I have wiped out the IOS of a 2950 Series Swich:When the switch boots i get the follwoing output:Parameter Block Filesystem (pb:) installed, fsid: 4Loading ""...: permission deniedError loading ""Interrupt within 5 seconds to abort boot proces...

Aris Pipis · 07-04-2011

Hello leolaohooI turned on the switch and I posted the dir flash:As you can see I had some issues that lead me to format the flash (for one more time)I was surprised to notice that this time the format worked! I have been unsuccessfully trying to for...

Aris Pipis · 07-01-2011

The format did work, then i re tried but again the procedure failed.

Aris Pipis · 06-30-2011

Already did it!

Aris Pipis · 06-30-2011

Hello,Yes you are right, the correct filesize should have been 3,059 KB.I issued another dir flash: command and i got the following outputswitch: dir flash:Directory of flash:/2 -rwx 0 c2950-i6q4l2-mz.121-22.EA14.bin3 -rwx ...

Aris Pipis · 06-29-2011

It seems that it s a hardware problem as stated above by sylvain.munaut. Unfortunate the flash is built in (I opened the switch to check whether I could remove theFlash and try to read it with a card reader or insert a new one... in an attempt to fur...

Member Since	‎06-28-2011 03:41 AM
Date Last Visited	‎03-01-2019 02:02 AM
Posts	7

User Statistics

User Activity

Recovering Catalyst Switches from a Corrupted or Missing Image

Recovering Catalyst Switches from a Corrupted or Missing Image

Recovering Catalyst Switches from a Corrupted or Missing Image

Recovering Catalyst Switches from a Corrupted or Missing Image

Recovering Catalyst Switches from a Corrupted or Missing Image

Recovering Catalyst Switches from a Corrupted or Missing Image