Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I'm working in a networking project and we are evaluating using the Catalyst high performance C9500-48Y4C and C9500-24Y4C as distribution switches.For a short time we need to have the down-links in 1G and then we will migrate them to 10G. I would...
Hi all,
I´m configuring VRF route leaking between 3 VRF (SERVICES, AAA, BBB) using VRF-Lite as shown in the configuration below.With this configuration, VRF AAA and BBB will learn the 4 static route from VRF SERVICES. I would like to know if there is...
Hi,Someone knows if there is a way to filter the "SNMP set OID" that can be set/reachable on a Cisco Nexus?I would like permit in the Cisco Nexus that only one particular OID can be reachable from any source IP that has read/write access. Thanks in a...
Hi,I have enable QoS in an access swtich.By default all the ports are in untrusted state and I have configure the uplink (Te1/1) as trust and enable the priority queue.The question is why the DSCP counters of the outgoing traffic in the uplink port i...
Hi,In a 6509E with IOS IPservicesK9 12.2(33)SXH2a, 2 VRF instances both with several associated interfaces in each VRF and VRF aware logging enabled. Which will be the source interface for logging on each VRF?Looking through http://www.cisco.com/en/U...
In your test, you are using the new SFP GLC-SX-MMD.I need to confirm if the GLC-SX-MM works. This SFP is the old one and they don't have de DOM. Do you have one of this SFP GLC-SX-MM made a test and verify if the works? Thanks!!!
Hi BB, Thanks for your replay.I don't see any issue, but I need to be sure that the old SFPs GLC-SX-MM= will work correctly in this specific models C9500-48Y4C or C9500-24Y4CI will use them temporarily, but if they don't work the project will have ex...
Hi Paul,
I made some tests using "import map" but unfortunately I don't get working what I wanted.
Could you share an example of import route using "import map" were I can filter which route import form one VRF to another?
Thanks in advance.
