About djulien357

djulien357 · 03-26-2013

Hi everyone,I am having weird problem with my edge routers .Everything was working perfectly before I configured NAT forwarding but stopped allowing incoming telnet and ssh sessions from the internet the second it was implemented . I have added an ...

djulien357 · 03-27-2013

I did remove the local polict route-map but still no go .

djulien357 · 03-27-2013

Yes it does . I only want to allow telnet and ssh access to two workstations on the local network and to my remote home office just in case I have to access the router remotely (backdoor) in case of the firewalls behind those routers fail without hav...

djulien357 · 03-27-2013

Correct me if I am wrong the explicit deny in the access-list will deny anything else that do not match those 3 hosts in the telnet_access list therefore adding deny any log will not make a difference . Those 3 hosts are the only one by design that s...

djulien357 · 03-27-2013

I tried changing the access-list and update the route-map as suggested but still no go . I am still unable to telnet or ssh to the device .

djulien357 · 03-26-2013

Ok guys,Below is the config but I had to change the ip addresses for security purposes but this should still give you an idea on how the router is configured .version 15.1service timestamps debug datetime msecservice timestamps log datetime msecno se...

Member Since	‎02-22-2006 01:51 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	11

User Statistics

User Activity

Telnet and SSH stopped working after configuring static NAT on router

Telnet and SSH stopped working after configuring static NAT on r

Re: Telnet and SSH stopped working after configuring static NAT

Telnet and SSH stopped working after configuring static NAT on r

Telnet and SSH stopped working after configuring static NAT on r

Telnet and SSH stopped working after configuring static NAT on r