Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
My 6509 using a SUP2/MSFC2 will not load the msfc2. I have been all through the rommon and uploading the msfc2 image to the bootflash but I just cannot get it to load. I would like to convert this to just the "hybrid" IOS but due to service contrac...
We have an ASA 5510 and have setup the typical 1-to-1 static NAT addressing to multiple virtual machines. I have an accesss list for the outside interface to allow icmp traffic in. What happens is it will ping an address but it is very intermittent...
My issues appear to be solved. All of our NAT'ing as well as our setup for the icmp to be allowed was correct. I did resolve the issue with the dup NAT IP with the default pool IP but that was not causing the isssue and was narrowed down to a serv...
Thanks for responding Jouni. I was just lookingn at the same infromation you just described. We may have an overlapped IP. I have sent the information over to our IT Admin that setup the ASA. I will have more information later. Hopefully remova...
I have been having similar issues related to upgrading my phones with version 7.1.3 but I am working through it. I wanted to point something out to you. If you are using IPCC servers in conjunction with you CUCM 7.1.3 you are going to run into anot...
