Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Team,I have configured one L2L VPN and an easy VPN in my PIX firewall with version of 7.2(1). Both tunnel are up and my L2L VPN traffic is passing through, but my easy VPN traffic is not passing. The traffic is getting encrypted from the client s...
Hi all,I have two ACS server for windows with 4.2 version. My problem is that if the primary ACS server is down, the dynamic users from the windows database in not able to authenticate with secondary ACS server. Please note that if a user added to th...
My key server 1 has the high priority than key server 2 in the redundancy configuration for Groups.All group members showing both key server informations in GDOI .But when the key server 1 fails the connectivity drops and showing no policy and acl in...
Hi,I have enabled the syslog at debugging level and still I am not getting any hit on this traffic. You can see other traffic on this same server from the output below%PIX-4-106023: Deny udp src DMZ2:db/2272 dst inside:10.10.0.203/53 by access-group ...
Hi,I have enabled the management-access in PIX, but still I couldn't ping.PIX525(config)# sh run management-access management-access insidePhaseII-ADSL#ping 10.6.6.254 source 172.30.30.1Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to ...
The IP 10.10.0.203 is one of the server which is connected to inside to the PIX. We could ping this server if L2L VPN is removed. Should I configure management-access in this case ? The PIX inside interface IP is 10.6.6.254.ThanksAbison
Hi Prapanch,The mode is network-extension and even in client mode I couldn't establish the tunnel. I have upload the requested file output here as I couldn't see any conflict in subnet. Please let me know if you need more informations.ThanksAbison
