Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi allI like to tune the switchover timer for a SorryServer configuration. Actually the timer are set by default to 5 minutes.I like to tune the timer down to 1 minute. Is there a configuration option to change this default timer?Thanks for feedback.
Hi all,I have a issue with a ACE configuration which terminate https traffic and load balance the client request to the real servers.All working fine, with one exception. If the client requests for the URL "https://www.myservice.com/content/" the con...
Hi allAfter an upgrade from ACS 5.1 to 5.3 the view-logprocessor are not running any more.I also installed the newest patch 5.3.0.40.1. The installations are success but the view-logprocessor steal are not working.Someone have any suggestion to resol...
Hello allHave a PIX with 6.3.4 running. Want to route traffic internal to a L3 device. Static route to inside are configured.route inside 10.57.7.0 255.255.255.0 10.57.1.3 1Default GW for internal devices are the PIX. If a device on inside tris to re...
Hi Kanwal,I removed the parameter map from the policy-map multi-match.After this the configuration work as desired.Thank's for support and best regards,Rene
Hi Cesar,Thank you for your answer.I tryed the wildcard entry also, without any success.I have tried to figure out the difference between policy-map type loadbalance http first-match and policy-map type loadbalance first-match.I used the example from...
Hi Kanwal,I have tried your solution today without any success.The configuration are simple, but the result are always the same.client browser---------https--------ACE-------http---------rserverIf the client use the URL: https://this.is.a.request.com...
Thanks for this excellent description of implementing IKEv2.If I made a change on the XML file on the ASA and I force the client to reconnect, I receive the error message below:***Function: CHttpSessionWinInet::handleServerCertErrorsFile: ..\Common\U...
