About pepebravo

pepebravo · 09-11-2019

Hello, with ACS it was possible to configure different syslog collectors per ACS node in a distributed environment. It makes sense if we have different ACS nodes distributed around the world and we want to configure it based on location. We are migra...

pepebravo · 04-17-2006

Hi, Im having this problem in my AS5350 with the ISDN E1 ports, Im sending calls from a PBX and when I have a RC 44, the PBX try all the channels in that E1, so I have 10-20 failed calls in my CDRs, I dont know why this happen, any help will be welco...

pepebravo · 01-20-2005

Hello, Anyone knows why I cant send more than 20 digits from my gateway to my PBX ?? Im using an AS5350, making the test from a cisco IP phone, I use a 21 or more digits number, I see the complete number matching the outgoing voice dialpeer, but when...

pepebravo · 01-04-2005

Hello, Its possible to create a "dummy" or "virtual" leg ?? something like a loopback interface. I need it to create a VXML dialog without a real incoming leg.Thx in advance

pepebravo · 12-30-2004

Hello, Here is my problem, Im using an hybrid application TCL/VXML, with some events I need to call VXML application to send messages to a HTTP server, the problem is that I need to send a message when the call is disconnected, the application doesn...

pepebravo · 01-13-2005

Thx for your response, but how can I do that ?? I searched commands for that purfose and dont find nothing ?? Do you have any example ?? Im using TCL/VXML hybrid scripts, but cant execute a new VXML program from TCL if the calling user hang on.Thx in...

pepebravo · 01-04-2005

I have a SER SIP Server behind a PIX 515e with authentication, I have the same problem at the beggining, but then I use use names and not IPs in my configuration, and now I can authenticate users without problem. If your private IP is for example 19...

pepebravo · 12-30-2004

Its me again, Now I know that the problem is when I receive "ev_disconnect" the incoming leg just dissapair, so cant execute commands using that leg, is there a way to create a "virtual leg" to use for this ??? I only need VXML to send messages to an...

pepebravo · 12-09-2004

thx a lot, it works fine

pepebravo · 12-03-2004

Hello, The messages you have in the GK are RAS, so I use "debug ras", if you need a more explained debug abut whats happening you can also use "debug h225 asn1"I hope this help YouCya

Member Since	‎12-01-2004 02:11 AM
Date Last Visited	‎09-16-2019 04:37 AM
Posts	12

User Statistics

User Activity

Cisco ISE and Logging Categories Per-instance

ISDN Release cause 44

20 digits max

dummy leg

tcl & VXML disconnecting

Re: dummy leg

Re: SIP server behind PIX

Re: tcl & VXML disconnecting

Re: Logos with CCME 3.2

Re: How to debug H.323 on a Gatekeeper?