Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear All :I have issue with my ISE 1.3 , I can not find the option of "posture discovery" in my authorization profile the option should be fund under "Web Redirection (CWA,DRW,MDM,NSP,CPP) I should also find PD posture discovery , by this I can not m...
Dear ExpertsI have some issues with my FWSM the problem is some of my client connected to my FWSM lose the connection to network , but when I did shut and no shut to the relative FWSM interface the connection is back , so is there any help??
Hi Dear All:I have 2 ISP internet connection It isV-sat satellite connection and two Cisco 1800 routers each one have connected to separate V-sat what I want exactly is how to make my workstation connected to the internet as one like ,, meaning if ea...
Hi dear all :I have a strange problem , when I try to save my configuration on the asa5520 I get the error massege that say"%Error reading system:/running-config (Configuration line too long)Error executing command[FAILED]"I check the memory and cpu ...
Hi Dear All :my case is verey simple but it is dos not work , well I have an ASA5520 connected to two windows ISA2004 servers the inside interface of asa and the two interfaces of ISA2004 all are in the same subnet and all ping each autherthe problem...
Dear All I have try all commands to see if I have some load on my FWSM and All are ok the command was show cpu usagshow np Blockshow nicshow trafficshow xlateshow memoryall indicate that my FWSM have no load at all and every thing is normal 100%so wh...
Thank you M.Sir:Yes the snmp-server command was the problemI remove the command and it is work ok , so thank you frined I have rate your solutionemad Frag
Hi Dear Husy:I would like to say thanks for your help I did as you say and configure my ASA now it is work like I want , I rate to you friend.Emad Farag CCIE#20099 (security)
Hi Dear :First of all you have to trun on loggin on your ASA to see if there is any deny , then I thing your problem is an application inspection , this mean you have to add some inspection command on the ASA global_policy to inspect your application...
Hi Freind:first of all thank you for your car and helpthen I know what the message 2-106017 mean but i want to inform you that the IP i get in this message was the IP of secoand ASA-AntiXso i know there is no spoof attack it just false positive alar...
