Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have searched CCO and can not find a document that provides the throughput of an 815 model router. I found this document that lists some other 800 series models but not the 815.http://www.cisco.com/web/partners/downloads/765/tools/quickreference/r...
Thanks for the responses. I am trying to find some documentation from Cisco that proves that this router is considerably under-powered for today's broadband offerings. I thought maybe someone who has access to Channel Partner documentation might f...
Federico provided you with a method that uses Port Address Translation to overload the 192.168.16.x range to the inside interface of the PIX, which has an address in the 192.168.15.x range. Using this method will not result in a duplication of addre...
If I understand this question, this person wants to NAT the 192.168.16.x addresses to a 192.168.15.x address pool to match the ACL permit rule on the MPLS routers.If you do this, you will likely create duplicate addresses. For example, if you have a...
The "modem enable" command under the console port (line con 0) toggles between console port access and aux port access. They are mutually exclusive. However, you can configure "modem InOut" under line aux 0 to allow you to dial into the router via ...
