Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,Recently I have encountered high number of soft bounced. Mostly those emails are destined for yahoo. I was able to verify this using tophosts command.What could be the cause of this and what can I do solve this issue?Thanks!
Hi AllRecently setup ASA 5505 as Firewall and easy VPN server. Everything seems to be fine except that remote vpn users can't ping any users on the local LAN. Their Internet connection by the way is Static PPPOE and no default gateway was given by th...
Hi All,Got a site-to-site VPN problem. My main main site has site-to-site VPN connection to two remote sites. It also acts as VPN server to remote clients.Main site uses Pix 515e while the remote sites both have Pix 501. All connections was working ...
Hi All,Just want to know if there is a way to configure secondary IP address on the outside/public interface of ASA/PIX.One of our clients have used most of their IP on the subnet given by their ISP. They use those IP's for staticallymapping to Serve...
Got a scenario where when a I divert Http Traffic to CSC-SSM, Invalid URL errorIs encountered. Attached is the network diagram. Users from branch network gets theirInternet connection via the squid proxy of the main branch. The main branch is connec...
I'm reattaching it again.This is the original config when VPN connection failed. I revert back to it since the changes that I made did not work.Things that I have done are used vpnpool2(different subnet for remote vpn clients). Used " identity addres...
Here is the config from the main site with some changes to the IP addressing. For the Ip Pool of remote clients I have used vpnpool2.Have also tried using "identity address" to no avail.Thanks!
Hi HalijennJust change the ip pool for remote clients and issued "clear crypto ipsec sa" and "clear crypto isakmp sa" , unfortunately we are still encountering the same problem. No Encapsulation on the main site, only decaps. Any other ideas?Really a...
Hi Halijenn,Thanks for your reply. Still encountering the same problem. Regarding the crypto-acl issue, I checked the configon the main site and those ACL that you pointed out are actually different. May have made a mistake while transferring the con...
